Floor Edger

The Super 7R edger is the perfect tool for professional landscapers and homeowners alike. With a 7″ blade, this edger can handle any size job with ease.

The curved design of the Super 7R also allows you to get into tight spaces, making it the perfect choice for those hard-to-reach areas around your flower beds, trees, and other landscaping features.

This edger can make your life easier by requiring less strain on your body to get the job done.

Using ergonomic grips along with a curved design makes this electric edger feel like an extension of your own body as you seamlessly go from one section of your garden to the next.

The Super 7R edger has an adjustable handle to find the most comfortable position for you. This also allows it to be used by anyone, regardless of their height or strength.

Super 7R Edger specifications

• Motor – 1 hp
• Abrasive size – 7″x 7 7/8″ disc
• Disc rate – 2800 rpm
• Disc driver system – Gear-driven
• Dust collection * Standard
• Dust control rate – 110 CFM

Super 7R Edger operating instructions

The Super 7R edger is easy to operate:

1. Connect the plug to the outlet and press the on button. You will then see a green light, which means the machine is ready to go.
2. To start edging, hold the machine with both hands and adjust the height so that the blade is slightly above ground level.
3. While holding the machine with one hand, tilt it slightly forward and pull back on the handle. The blade will then cut into the ground.
4. Keep edging while tilting the machine slightly backward to let soil fall away from the blade.
5. To stop edging, release pressure on the handle and let gravity pull you down.
6. Empty the dust bag once it reaches 1/2 full.

Super 7R Edger Adjustment Procedures

Leveling the edger:

1. Set the handle height selector to maximum height.
2. Adjust the wheels to be at equal height and pointing straight forward.
3. Hold down the handle, the lower front part of the edger, and push down on adjustable feet until the machine is level with the ground and there is a 1cm gap between the bottom of the blade and surface.

Adjusting the blade height:

With the machine is turned off, hold down the height adjustment lever and turn the blade height, adjusting the knob clockwise or counterclockwise to desired blade height using a screwdriver.

Adjusting the handle:

While the machine is turned off, hold down the handle and twist it to the desired position. Release the handle.

We sell all accessories in-store and online

• Pads
• Sealer
• Polyurethane
• Lambskin Applicator

Have any questions? Call us today at (718) 395-5939 or Visit our store at 765 E New York Ave, Brooklyn, NY 11203. We also deliver to all five boroughs, varies by location, call for rates!

What you should know before renting a floor drum sander

A floor drum sander is for smaller flat surfaces, hard-to-reach areas, and corners. You will need to rent a hardwood floor edger for larger projects.

When sanding the hardwood floor, it’s advised to wear safety products such as a dust mask or respirator to prevent wood dust inhalation.